Showing 1–24 of 42 results

Show sidebar
Close

Twin Wall Pro Guy Wire Bracket Ø 6″

£11.99
Guy wire bracket to be used in conjunction with a guy wire bracket kit to allow three points of contact to support exposed flues needing additional support. Normally used for flat roof installations. The inner and outer skins of our Twin Wall Pro are made using a high grade stainless steel at 0.4mm thick. Highly insulating, compressed Rockwool is sandwiched between the fully welded skins. Secure TWPro flue together with the supplied locking band. With recessed locking bands, TW Pro is arguably the best looking Twin Wall flue on the market.
Close

Twin Wall Pro 50-80mm Adjustable Wall Bracket Ø 6″

£19.99
Adjustable Twin Wall Pro Wall Bracket that allows you to set the bracket length to any size between its minimum and maximum measurements. The inner and outer skins of our Twin Wall Pro are made using a high grade stainless steel at 0.4mm thick. Highly insulating, compressed Rockwool is sandwiched between the fully welded skins. Secure TWPro flue together with the supplied locking band. With recessed locking bands, TW Pro is arguably the best looking Twin Wall flue on the market.
Close

Twin Wall Pro Storm Collar Ø 6″

£20.99
Storm Collars are installed onto the twin wall flue system directly above the flashing outside. The storm collar will deflect the worst off all weather away from the top of the flashing giving extra protection against leaks The inner and outer skins of our Twin Wall Pro are made using a high grade stainless steel at 0.4mm thick. Highly insulating, compressed Rockwool is sandwiched between the fully welded skins. Secure TWPro flue together with the supplied locking band. With recessed locking bands, TW Pro is arguably the best looking Twin Wall flue on the market.
Close

Twin Wall Pro Single Wall to Twin Wall Cone Adaptor Ø 6″

£21.99
Adaptors are used to take you from Single Wall vitreous flue pipe to our Twin Wall Pro flue system. There are two different types, cone shaped and flat shaped. They both serve the same purpose so the choice is down to your own personal preference of what you prefer the look of. The inner and outer skins of our Twin Wall Pro are made using a high grade stainless steel at 0.4mm thick. Highly insulating, compressed Rockwool is sandwiched between the fully welded skins. Secure TWPro flue together with the supplied locking band. With recessed locking bands, TW Pro is arguably the best looking Twin Wall flue on the market.
  • 50mm Distance from combustible materials.
  • Simple Snaplock locking band system.
  • recessed, flush locking bands for streamline look.
  • 10 year warrenty.
Close

Twin Wall Pro Joist support Ø 6″

£22.99
The Joist support is used to span two joists as the flue passes through floors and attic space to offer solid structural support to the flue. The inner and outer skins of our Twin Wall Pro are made using a high grade stainless steel at 0.4mm thick. Highly insulating, compressed Rockwool is sandwiched between the fully welded skins. Secure TWPro flue together with the supplied locking band. With recessed locking bands, TW Pro is arguably the best looking Twin Wall flue on the market.
Close

Twin Wall Pro Roof Support Ø 6″

£22.99
Roof Support with rotating brackets to be used on the inside of pitched roofs. The inner and outer skins of our Twin Wall Pro are made using a high grade stainless steel at 0.4mm thick. Highly insulating, compressed Rockwool is sandwiched between the fully welded skins. Secure TWPro flue together with the supplied locking band. With recessed locking bands, TW Pro is arguably the best looking Twin Wall flue on the market.
Close

Twin Wall Pro Roof Support LONG Ø 6″

£24.99
Roof Support with rotating brackets to be used on the inside of pitched roofs. Extra long brackets for large gaps between attic trusses. The inner and outer skins of our Twin Wall Pro are made using a high grade stainless steel at 0.4mm thick. Highly insulating, compressed Rockwool is sandwiched between the fully welded skins. Secure TWPro flue together with the supplied locking band. With recessed locking bands, TW Pro is arguably the best looking Twin Wall flue on the market.
Close

Twin Wall Pro Tee Cap Ø 6″

£24.99
Please remember to purchase a Tee Cap with any Tee component as they do not come with them as standard. The inner and outer skins of our Twin Wall Pro are made using a high grade stainless steel at 0.4mm thick. Highly insulating, compressed Rockwool is sandwiched between the fully welded skins. Secure TWPro flue together with the supplied locking band. With recessed locking bands, TW Pro is arguably the best looking Twin Wall flue on the market.
  • 50mm Distance from combustible materials.
  • Simple Snaplock locking band system.
  • recessed, flush locking bands for streamline look.
  • 10 year warrenty.
Close

Twin Wall Pro Single Wall to Twin Wall Flat Adaptor Ø 6″

£29.99
Adaptors are used to take you from Single Wall vitreous flue pipe to our Twin Wall Pro flue system. There are two different types, cone shaped and flat shaped. They both serve the same purpose so the choice is down to your own personal preference of what you prefer the look of. The inner and outer skins of our Twin Wall Pro are made using a high grade stainless steel at 0.4mm thick. Highly insulating, compressed Rockwool is sandwiched between the fully welded skins. Secure TWPro flue together with the supplied locking band. With recessed locking bands, TW Pro is arguably the best looking Twin Wall flue on the market.
  • 50mm Distance from combustible materials.
  • Simple Snaplock locking band system.
  • recessed, flush locking bands for streamline look.
  • 10 year warrenty.
Close

Twin Wall Pro Fire Stop Plate Cover – White – 6″

£31.99
Firestop plate Covers are used for an even neater finish on your flue system. When installing your firestop plate, use the supplied magnets and fixings to allow you to simply click on this simple yet stylish firestop plate cover to hide all fixings, gaps and ventilation holes. Firestop Plates are used when a flue is passing through a vertical or horizontal wall or ceiling . The fire stop plate guarantee's that 50mm to combustibles has been allowed for and gives you a neat finish after the hole for the flue has been cut. The inner and outer skins of our Twin Wall Pro are made using a high grade stainless steel at 0.4mm thick. Highly insulating, compressed Rockwool is sandwiched between the fully welded skins. Secure TWPro flue together with the supplied locking band. With recessed locking bands, TW Pro is arguably the best looking Twin Wall flue on the market.
Close

Twin Wall Pro Tee Cap With Drain Ø 6″

£31.99
Please remember to purchase a Tee Cap with any Tee component as they do not come with them as standard. The inner and outer skins of our Twin Wall Pro are made using a high grade stainless steel at 0.4mm thick. Highly insulating, compressed Rockwool is sandwiched between the fully welded skins. Secure TWPro flue together with the supplied locking band. With recessed locking bands, TW Pro is arguably the best looking Twin Wall flue on the market.
  • 50mm Distance from combustible materials.
  • Simple Snaplock locking band system.
  • recessed, flush locking bands for streamline look.
  • 10 year warrenty.
Close

Twin Wall Pro 100mm Length Ø 6″

£34.99
The inner and outer skins of our Twin Wall Pro are made using a high grade stainless steel at 0.4mm thick. Highly insulating, compressed Rockwool is sandwiched between the fully welded skins. Secure TWPro flue together with the supplied locking band. With recessed locking bands, TW Pro is arguably the best looking Twin Wall flue on the market.
  • 50mm Distance from combustible materials.
  • Simple Snaplock locking band system.
  • recessed, flush locking bands for streamline look.
  • 10 year warrenty.
Close

Twin Wall Pro Ventilated Fire Stop Plate – WHITE – 6″

£39.99
Firestop Plates are used when a flue is passing through a vertical or horizontal wall or ceiling . The fire stop plate guarantee's that 50mm to combustibles has been allowed for and gives you a neat finish after the hole for the flue has been cut. The inner and outer skins of our Twin Wall Pro are made using a high grade stainless steel at 0.4mm thick. Highly insulating, compressed Rockwool is sandwiched between the fully welded skins. Secure TWPro flue together with the supplied locking band. With recessed locking bands, TW Pro is arguably the best looking Twin Wall flue on the market.
Close

Twin Wall Pro 250mm Length Ø 6″

£39.99
The inner and outer skins of our Twin Wall Pro are made using a high grade stainless steel at 0.4mm thick. Highly insulating, compressed Rockwool is sandwiched between the fully welded skins. Secure TWPro flue together with the supplied locking band. With recessed locking bands, TW Pro is arguably the best looking Twin Wall flue on the market.
  • 50mm Distance from combustible materials.
  • Simple Snaplock locking band system.
  • recessed, flush locking bands for streamline look.
  • 10 year warrenty.
Close

Twin Wall Fire Stop Plate Ø 6″

£48.99
Firestop Plates are used when a flue is passing through a vertical or horizontal wall or ceiling . The fire stop plate guarantee's that 50mm to combustibles has been allowed for and gives you a neat finish after the hole for the flue has been cut. The inner and outer skins of our Twin Wall Pro are made using a high grade stainless steel at 0.4mm thick. Highly insulating, compressed Rockwool is sandwiched between the fully welded skins. Secure TWPro flue together with the supplied locking band. With recessed locking bands, TW Pro is arguably the best looking Twin Wall flue on the market.
Close

Twin Wall Pro 80-130mm Adjustable Wall Bracket Ø 6″

£49.99
Adjustable Twin Wall Pro Wall Bracket that allows you to set the bracket length to any size between its minimum and maximum measurements. The inner and outer skins of our Twin Wall Pro are made using a high grade stainless steel at 0.4mm thick. Highly insulating, compressed Rockwool is sandwiched between the fully welded skins. Secure TWPro flue together with the supplied locking band. With recessed locking bands, TW Pro is arguably the best looking Twin Wall flue on the market.
Close

Twin Wall Pro Rain Cap Terminal Ø 6″

£53.99
Standard Rain Cap cowl designed to keep the worst of the bad weather out. The inner and outer skins of our Twin Wall Pro are made using a high grade stainless steel at 0.4mm thick. Highly insulating, compressed Rockwool is sandwiched between the fully welded skins. Secure TWPro flue together with the supplied locking band. With recessed locking bands, TW Pro is arguably the best looking Twin Wall flue on the market.
  • 50mm Distance from combustible materials.
  • Simple Snaplock locking band system.
  • recessed, flush locking bands for streamline look.
  • 10 year warrenty.
Close

Twin Wall Pro Adjustable Roof Brace Kit Ø 6″

£54.99
Roof Brace kit is used to offer additional support to flue systems. The roof brace kit comes with two adjustable legs that once fixed become two ridged points of contact holding the flue steady. This kit is generally used when the flue system is exiting a pitched roof much lower then the ridge and requires additional height to bring it to the correct height for building regulations. It can also be used on flat roofs. The inner and outer skins of our Twin Wall Pro are made using a high grade stainless steel at 0.4mm thick. Highly insulating, compressed Rockwool is sandwiched between the fully welded skins. Secure TWPro flue together with the supplied locking band. With recessed locking bands, TW Pro is arguably the best looking Twin Wall flue on the market.
Close

Twin Wall Pro 130-210mm Adjustable Wall Bracket Ø 6″

£54.99
Adjustable Twin Wall Pro Wall Bracket that allows you to set the bracket length to any size between its minimum and maximum measurements. The inner and outer skins of our Twin Wall Pro are made using a high grade stainless steel at 0.4mm thick. Highly insulating, compressed Rockwool is sandwiched between the fully welded skins. Secure TWPro flue together with the supplied locking band. With recessed locking bands, TW Pro is arguably the best looking Twin Wall flue on the market.
Close

Twin Wall Pro Rain Cap Terminal With Bird Mesh Ø 6″

£58.99
Standard Rain Cap cowl with bird mesh designed to keep the worst of the bad weather out and prevent birds building nests. The inner and outer skins of our Twin Wall Pro are made using a high grade stainless steel at 0.4mm thick. Highly insulating, compressed Rockwool is sandwiched between the fully welded skins. Secure TWPro flue together with the supplied locking band. With recessed locking bands, TW Pro is arguably the best looking Twin Wall flue on the market.
  • 50mm Distance from combustible materials.
  • Simple Snaplock locking band system.
  • recessed, flush locking bands for streamline look.
  • 10 year warrenty.
Close

Twin Wall Pro 15° Bend Ø 6″

£59.99
The inner and outer skins of our Twin Wall Pro are made using a high grade stainless steel at 0.4mm thick. Highly insulating, compressed Rockwool is sandwiched between the fully welded skins. Secure TWPro flue together with the supplied locking band. With recessed locking bands, TW Pro is arguably the best looking Twin Wall flue on the market.
  • 50mm Distance from combustible materials.
  • Simple Snaplock locking band system.
  • recessed, flush locking bands for streamline look.
  • 10 year warrenty.
Close

Twin Wall Pro 30° Bend Ø 6″

£59.99
The inner and outer skins of our Twin Wall Pro are made using a high grade stainless steel at 0.4mm thick. Highly insulating, compressed Rockwool is sandwiched between the fully welded skins. Secure TWPro flue together with the supplied locking band. With recessed locking bands, TW Pro is arguably the best looking Twin Wall flue on the market.
  • 50mm Distance from combustible materials.
  • Simple Snaplock locking band system.
  • recessed, flush locking bands for streamline look.
  • 10 year warrenty.
Close

Twin Wall Pro 45° Bend Ø 6″

£59.99
The inner and outer skins of our Twin Wall Pro are made using a high grade stainless steel at 0.4mm thick. Highly insulating, compressed Rockwool is sandwiched between the fully welded skins. Secure TWPro flue together with the supplied locking band. With recessed locking bands, TW Pro is arguably the best looking Twin Wall flue on the market.
  • 50mm Distance from combustible materials.
  • Simple Snaplock locking band system.
  • recessed, flush locking bands for streamline look.
  • 10 year warrenty.
Close

Twin Wall Pro 210-420mm Adjustable Wall Bracket Ø 6″

£64.99
Adjustable Twin Wall Pro Wall Bracket that allows you to set the bracket length to any size between its minimum and maximum measurements. The inner and outer skins of our Twin Wall Pro are made using a high grade stainless steel at 0.4mm thick. Highly insulating, compressed Rockwool is sandwiched between the fully welded skins. Secure TWPro flue together with the supplied locking band. With recessed locking bands, TW Pro is arguably the best looking Twin Wall flue on the market.